18001025661 / 8527794500
info@sgtuniversity.org

Publication in Engineering

Scientific Paper Publication

 

 

List of publications 2021
S. No Publications
1 Babbar A, Jain V, Gupta D, Agrawal D, Prakash C, Singh S, Wu LY, Zheng HY, Królczyk G, Bogdan-Chudy M. Experimental analysis of Wear and Multi-Shape Burr Loading during Neurosurgical Bone Grinding. Journal of Materials Research and Technology. 2021 Feb 24. (SCI IF = 5.289). ISSN: 2238-7854, 24-02-2021
2 Babbar A, Jain V, Gupta D, Agrawal D. Histological evaluation of thermal damage to Osteocytes: A comparative study of conventional and ultrasonic-assisted bone grinding. Medical Engineering & Physics. 2021 Feb 16. (SCI IF = 1.737). ISSN: 1350-4533, 16-02-2021
3 Babbar A, Jain V, Gupta D, Agrawal D. Finite element simulation and integration of CEM43 °C and Arrhenius Models for ultrasonic-assisted skull bone grinding: A thermal dose model. Medical Engineering & Physics. 2021 Feb 16. (SCI IF = 1.737). ISSN: 1350-4533, 16-02-2021
4 Babbar A, Sharma A, Singh P. Multi-objective optimization of magnetic abrasive finishing using grey relational analysis. Materials Today: Proceedings. 2021 Mar 2.(Scopus Indexed) ISSN: 2214-7853, 02-03-2021
5 Manu phogat, Ajay Kumar ,“A Novel Automating Irrigation Techniques based on Artificial Neural Network and Fuzzy Logic”, Journal of Physics CS (JPCS), March 2021
6 Sandeep Singh, Harjot Kaur ,“Infuenza Prediction from Social Media Texts using Machine Learning”, ISIC 2021 – Scopus, Feb 2021
7 Sandeep Singh, Harjot Kaur ,“Sentiment Analysis”, Wiley, Feb 2021
8 Vinod Kumar, Mr. Zunaid,”A Review Paper on Hypervisor and Virtual machine Security”, 1st International Conference on Mechatronics and Artificial Intelligence February 2021
List of publications 2020
S. No Publications
1 Yaman Hooda, Haobam Derit Singh, Rheodynamic Concrete as a Progressive Viability in the field of Concrete Technology”, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-3, February, 2020.
2 Sweety Rajput, Neeraj Saini, Comparative study on different fruit wastes derived
ethanol using yeast strains (MTCC 170/ 180): Submerged vs Solid State Fermentation, International Journal of Advanced Science and Technology, vol. 29, 2020, pp. 1417-1427. (IF: 0.4) (SJR: 0.13).
3 Ravpreet Kaur, Harvinder Singh, Steel fiber reinforced light weight aggregate concrete, International Journal of Recent Technology and Engineering(IJRTE ), ISSN:2277-3878,Vol.9, Issue 1, May 2020.
4 Sweety Rajput, Neeraj Saini, Malini Tewari, Assessment of the Effects of Stiffness on the Seismic Behavior of Framed Building, Journal of Critical Reviews, ISSN: 2394-5125, Volume-7 Issue-7, April 2020.
5 Preeti Kuhar, Neeraj Saini, Sweety Rajput, Impact on the Hardening Properties of High Performance Concrete with the Incorporation of Super Plasticizers: SNF vs PCE, Studies in Indian Place Names (UGS care journal), Volume-40 Issue-10, February 2020.
6 Kumar, A., Gulati, V. (2020), Optimization and Investigation of Process Parameters in Single Point Incremental Forming, Indian Journal of Engineering & Materials Sciences, Vol. 27, issue 2, April 2020, pp. 246-255, ISSN: 0975-1017 (Online); 0971-4588 (Print) http://nopr.niscair.res.in/handle/123456789/54868,
7 Kumar, A., Gulati, V., Kumar, P., Singh, H., Singh, V., Kumar, S., Haleem, A. (2020), Parametric Investigation of Forming Forces in Single Point Incremental Forming, Materials today proceedings, Elsevier, 24(2020), 611-617, https://doi.org/10.1016/j.matpr.2020.04.315, ISSN: 2214-7853
8 Dhaliwal P., Kumar, A., Chaudhary P. (2020), An Approach for Concept Drifting Streams: Early Dynamic Weighted Majority, Procedia Computer Science, Elsevier, 167, 2653-2661, https://doi.org/10.1016/j.procs.2020.03.344, ISSN: 1877-0509
9 Babbar A, Prakash C, Singh S, Gupta MK, Mia M, Pruncu CI. Application of hybrid nature-inspired algorithm: Single and bi-objective constrained optimization of magnetic abrasive finishing process parameters. Journal of Materials Research and Technology. 2020 Jul 1;9(4):7961-74. (SCI IF = 5.289).
ISSN: 2238-7854, 12-05-2020
10 Baraiya R, Babbar A, Jain V, Gupta D. In-situ simultaneous surface finishing using abrasive flow machining via novel fixture. Journal of Manufacturing Processes. 2020 Feb 1;50:266-78 (SCI IF = 4.086).
ISSN: 1526-6125, 21-10-2019
11 Singh S, Prakash C, Pramanik A, Basak A, Shabadi R, Królczyk G, Bogdan-Chudy M, Babbar A. Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis. Materials. 2020 Jan;13(22):5156. (SCI IF = 3.057)
ISSN: 1996-1944, 16-11-2020
12 Babbar A, Jain V, Gupta D. Preliminary investigations of rotary ultrasonic neurosurgical bone grinding using Grey-Taguchi optimization methodology. Grey Systems: Theory and Application. 2020 Jun 23. (SCI IF = 2.268).
ISSN: 2043-9377, 26-06-2020
13 Babbar A, Jain V, Gupta D. In vivo evaluation of machining forces, torque, and bone quality during skull bone grinding. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 2020 Mar 17:0954411920911499. (SCI IF = 1.282).
ISSN: 0954-4119, 17-03-2020
14 Babbar A, Sharma A, Bansal S, Mago J, Toor V. Potential applications of three-dimensional printing for anatomical simulations and surgical planning. Materials Today: Proceedings. 2020 Apr 30. (Scopus Indexed)
ISSN: 2214-7853, 30-04-2020, Page 1558-1561
15 Babbar A, Jain V, Gupta D. Thermo-mechanical aspects and temperature measurement techniques of bone grinding. Materials Today: Proceedings. 2020 Feb 21. (Scopus indexed)
ISSN: 2214-7853, 21-02-2020, Page 1458-1462
16 Babbar A. Kumar A., Singh P. (2020) Investigation into magnetic abrasive finishing, Lambert Academic Publishing (978-620-2-68199-5).
17 Sharma A, Grover V, Babbar A, Rani R. A Trending Nonconventional Hybrid Finishing/Machining Process. InNon-Conventional Hybrid Machining Processes 2020 Oct 30 (pp. 79-93). CRC Press (Scopus Indexed).
ISBN: 9780429029165
18 Babbar A, Jain V, Gupta D, Sharma A. Fabrication of Microchannels using Conventional and Hybrid Machining Processes. Non-Conventional Hybrid Machining Processes: Theory and Practice. 2020 Oct 29:37. (Scopus Indexed).
ISBN: 9780429029165
19 Babbar A, Jain V, Gupta D, Prakash C, Singh S, Sharma A. Effect of Process Parameters on Cutting Forces and Osteonecrosis for Orthopedic Bone Drilling Applications. InCharacterization, Testing, Measurement, and Metrology 2020 Oct 26 (pp. 93-108). CRC Press. (Scopus Indexed).
ISBN: 9780429029165
20 Babbar A, Jain V, Gupta D, Prakash C, Sharma A. Fabrication and Machining Methods of Composites for Aerospace Applications. In Characterization, Testing, Measurement, and Metrology 2020 Oct 25 (pp. 109-124). CRC Press. (Scopus Indexed).
ISBN: 9780429298073
21 Sharma A, Jain V, Gupta D, Babbar A. A Review Study on Miniaturization: A Boon or Curse. Advanced Manufacturing and Processing Technology. 2020 Oct 26:111-31. (Scopus Indexed).
ISBN: 9780429298042
22 Babbar A, Jain V, Gupta D, Prakash C, Singh S, Sharma A. 3D Bioprinting in Pharmaceuticals, Medicine, and Tissue Engineering Applications. InAdvanced Manufacturing and Processing Technology 2020 Oct 26 (pp. 147-161). CRC Press. (Scopus Indexed).
ISBN: 9780429298042
23 Sharma A, Babbar A, Jain V, Gupta D. Influence of Cutting Force and Drilling Temperature on Glass Hole Surface Integrity During Rotary Ultrasonic Drilling. InAdvances in Production and Industrial Engineering (pp. 369-378). Springer, Singapore. (Scopus Indexed).
ISBN: 978-981-15-5519-0
24 Babbar A, Jain V, Gupta D, Singh S, Prakash C, Pruncu C. Biomaterials and Fabrication Methods of Scaffolds for Tissue Engineering Applications. In3D Printing in Biomedical Engineering 2020 (pp. 167-186). Springer, Singapore.
ISBN: 978-981-15-5424-7
25 Mr. Zunaid, Ms.Satnam kaur, Amritpal Kaur, “A Multi-Factorial Code Coverage based Test Case Selection & Prioritization for Object Oriented Programs”, 5th INTERNATIONAL CONFERENCE ON ICT FOR SUSTAINABLE DEVELOPMENT IN CONCURRENT WITH ICT AWARDS THE EXCELLENCIA, 2020
26 Sahil Vashisht, Sushma Jain and GS Aujla , “MAC protocols for unmanned aerial vehicle ecosystems: Review and challenges”, Computer Communication Journal, July 2020
27 Manpreet Singh Bajwa”,“ Implementation of Yolo for Disease and Pathogendetection with Infrared Photogrammetry”, International Journal of Control and Automation, Vol. 12, No.5, (2019), pp. 460 – 468
List of publications 2019
S. No Publications
1 Neeraj Saini, Chidchanok Wannasiri, Supphachok Chanmungkalakul, Nicha Prigyai, Vuthichai Ervithayasuporn, Suda Kiatkamjornwong, Furan/thiophene-based fluorescent hydrazones as fluoride and cyanide sensors, Journal of Photochemistry & Photobiology A: Chemistry, vol. 385, 2019, pp. 112038. (IF: 3.261) (SJR: 0.657)
2 Garg S., Goel A. (2019) Infiltration—A Critical Review. In: Agnihotri A., Reddy K.. (eds) Sustainable Engineering. Lecture Notes in Civil Engineering, vol 30. Springer, Singapore. (ISBN: 978-981-13-6717-5). https://link.springer.com/chapter/10.1007/978-981-13-6717-5_11
3 “Abhishek Dixit, Yaman Hooda, Experimental Evaluation on Compressive and Tensile Behavior of Concrete utilising GGBS, Fly Ash and Recycled Aggregates, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-8 Issue-5,PP 2277 – 2283, June 2019.”
4 Kumar, A., Gulati, V. (2019), Experimental Investigation and Optimization of Surface Roughness in Negative Incremental Forming, Measurement: Journal of the International Measurement Confederation, 131, 419-430, https://doi.org/10.1016/j.measurement.2018.08.078, ISSN: 0263-2241
5 Kumar, A., Gulati, V. (2019), Forming Force in Incremental Sheet Forming: A Comparative Analysis of the State of the Art, Journal of the Brazilian Society of Mechanical Sciences and Engineering, (2019) 41: 251. https://doi.org/10.1007/s40430-019-1755-2
6 Kumar, A., Gulati, V., Kumar, P. (2019), Experimental Investigation of Forming Forces in Single Point Incremental Forming, Springer book series, Lecture Notes in Mechanical Engineering, pp 423-430, https://doi.org/10.1007/978-981-13-6412-9_41, ISSN: 2195-4356
7 Kumar, K., Kumar, A., Singh, V. (2019), Optimization of Process Parameters for Erosion Wear in Slurry Pipeline, Springer book series, Lecture Notes in Mechanical Engineering, pp 131-140, https://doi.org/10.1007/978-981-13-6469-3_12, ISSN: 2195-4356
7 Manpreet Singh Bajwa”,“ “,Home Automation – A Vision for Beneficial Future”, Vol. 12 No. 5 (2019)
List of publications 2018
S. No Publications
    1 Neeraj Saini, Nicha Prigyai, Chidchanok Wannasiri, Vuthichai Ervithayasuporn, Suda Kiatkamjornwong, Green synthesis of fluorescent N,O-chelating hydrazone Schiff base for multi-analyte sensing in Cu2+, F and CN ions, Journal of Photochemistry and Photobiology A: Chemistry, vol. 358, 2018, pp. 215–225. (IF: 3.261) (SJR: 0.657)
    2 GARG S., GOEL A.. Review on study of Infiltration process and calculation of infiltration rate. In: Bansal A., Naval S. editors. EGRWSE-2018. Proceedings of the International Conference on Environmental Geotechnology, Recycled Waste Materials And Sustainable Engineering; 2018 March 29-31; NIT, Jalandhar. P. 66.(ISBN: 978-981-13-6716-8)
    3 GARG S., GOEL A.. Determination of Infiltration Rate by using Ring Infiltrometers. In: Anshumali, Venkatesh M, editors. BCCC-2018. Proceedings of the National Conference on Biochemical Cycles and Climate Change; 2018 Aug 10-11; IIT(ISM), Dhanbaad. P. 108-116.(ISBN: 978-93-5321-509-5)
4 Kumar, A., Gulati, V. (2018), Experimental Investigations and Optimization of Forming Force in Incremental Sheet Forming, Sadhana – Academy Proceedings in Engineering Sciences, 43(150), 1-15, Article DOI: 10.1007/s12046-018-0926-7, ISSN: 0256-2499 (print version), ISSN: 0973-7677 (electronic version)
5 Kumar, A., Gulati, V. (2018), Optimization and Investigation of Process Parameters in Single Point Incremental Forming, Indian Journal of Engineering & Materials Sciences, ISSN: 0975-1017 (Online); 0971-4588 (Print) submitted 24 august, 2017, Accepted 13 August, 2018
6 Kumar, A., Gulati, V., Kumar, P., Singh, V., Kumar, B., Singh, H. (2018), Parametric Effects on Formability of AA2024-O Aluminum Alloy Sheets in Single Point Incremental Forming, Journal of Materials Research and Technology, Article DOI: https://doi.org/10.1016/j.jmrt.2018.11.001, ISSN: 2238-7854
7 Kumar, A., Gulati, V., Kumar, P. (2018), Investigation of Surface Roughness in Incremental Sheet Forming, Procedia Computer Science, Elsevier, 133, 1014-1020, https://doi.org/10.1016/j.procs.2018.07.074, ISSN: 1877-0509
8 Kumar, A., Gulati, V., Kumar, P. (2018), Investigation of Process Variables on Forming Forces in Incremental Sheet Forming, International Journal of Engineering and Technology, 10(3), 680-684, DOI: 10.21817/ijet/2018/v10i3/181003021, e-ISSN : 0975-4024, p-ISSN : 2319-8613
9 Kumar, K., Kumar, S., Kumar, A. (2018), Effect of Additives on Static Settled Concentration, pH and Viscosity of Bottom Ash-Water Suspension, Journal of Mechanical Engineering, 68 (3), 49-58, https://doi.org/10.2478/scjme-2018-0026, ISSN 0039-2480, ISSN 2536-2948 (online)
10 Kumar, A., Gulati, V., Kumar, P. (2018), Effects of Process Parameters on Surface Roughness in Incremental Sheet Forming, Elsevier, Materials today proceedings, 5(14), 28026-28032, https://doi.org/10.1016/j.matpr.2018.10.043, ISSN: 2214-7853
11 Kumar, A., Gulati, V., Kumar, P., Singh, H., Singh, V., Kumar, S., Haleem, A. (2018), Parametric Investigation of Forming Forces in Single Point Incremental Forming, Elsevier, Materials Today Proceedings, Accepted
12 Kumar, A., Singh, V., Gupta, M. (2018). Investigating the morphology and thermophysical properties of Al2O3 and CuO nanofluids, IOP Conference Series: Materials Science and Engineering, Accepted
13 Gulati, V., Kumar, A. (2018), Investigation of some process parameters on forming force in single point incremental forming, International Research Journal of Engineering and Technology, e-ISSN: 2395-0056, p-ISSN: 2395-0072,  4(4), 784-791
14 Kumar, A., Kumar Y., Kumar, P. (2018), Barriers of Poka-Yoke in Indian Manufacturing Industries, Journal of Emerging Technologies and Innovative Research, ISSN: 2349-5162, vol.5 issue 7
15 Das G., A., Kumar Y., Kumar, A. (2018), Effect of dual Rhombus prisms obstacle on Heat Transfer and Fluid Flow Characteristics of laminar flow through parallel plate channel, Journal of Emerging Technologies and Innovative Research, ISSN: 2349-5162, vol.5 issue 7
16 Rajan and Vineet Kumar, “A Restart Scheme Based Metaheuristic for Flexible Job Shop Scheduling,” International Journal of Mechanical and Production Engineering Research and Development, Vol. 8, Issue 1 Feb 2018, 681-690 (2018).
17 Shubhangi chourasia, Job Evaluation In PVC Pipe Manufacturing company, IIIE Journal of Industrial Engineering, VOL –XI, 2018
18 “Analysis of process parameters in Wire EDM with H13 hot die hard steel using Taguchi method”, ICQPROM, 2017. V. Kannojiya, M. Deshwal and D. Deshwal, “Numerical Investigation of Solid Particle
Erosion in Pipe Elbow”, Materials Today: Proceeding, Elsevier, 2018.
List of publications 2017
S. No Publications
  1 Rajan and Vineet Kumar.: Hybridization of genetic algorithm & variable neighborhood search (VNGA) approach to crack the flexible job shop scheduling problem: A framework, Journal of Industrial Pollution Control, 33, (2), 90-99 (2017).
  2 Rajan and Vineet Kumar.: Flow Shop & Job Shop Scheduling: Mathematical Models, International Journal of R&D in Engineering, Science and Management, 5 (7), 1-7 (2017).
List of publications 2016
S. No Publications
    1 Mannar R. Maurya, Neeraj Saini, Fernando Avecilla, Study of temperature dependent three component dynamic covalent assembly via Hantzsch reaction catalyzed by dioxido- and oxidoperoxidomolybdenum(VI) complexes under solvent free conditions, RSC Advances, vol. 6, 2016, pp. 12993–13009. (IF: 3.049)
    2 Mannar R. Maurya, Neeraj Saini and Fernando Avecilla, “Study of temperature dependent hantzsch reaction catalyzed by dioxido- And oxidoperoxidomolybdenum(VI) complexes of 4-acetyl pyrazolone based ligands under solvent free condition”, confronted in the Pure and Applied

Chemistry International Conference, organized by Chemical Society of Thailand in conjunction with Department of Chemistry, Faculty of Science, Chulalongkorn University, Location: BITEC, Bangkok, Thailand-10260, Date: February 09-11, 2016 [INC-P-0200].

    3 Ravpreet Kaur, Manpreet Kaur, Numerical analysis of laterally loaded RC stiffened-plate using ANSYS, International Journal of Advanced Engineering Research and Science, vol. 3, 2016, pp. 167-174. (IF: 4.99) (SJR: 4.072)
4 Rajan Garg, Anam Singh and Rohit Dhawan, “Improving the Efficiency of Catalytic Converter by Reduction in Cold Start Emission: A Solution.” International Journal of R&D In Engineering, Science And Management, Vol.3, Issue 6, March 2016, p.p.180-186, ISSN 2393-865X.
5 Rajan Garg, Pawan Nain and Dr. Birajashis Pattnaik, “Designing & Modeling of 3 – Way Catalytic Converter in a Two Stroke S.I Engine.” International Journal of R&D In Engineering, Science And Management, Vol.3, Issue 7, April 2016, p.p.187-192, ISSN 2393-865X.
6 Pawan Nain, Rajan Garg and Anikate Gupta, “Study of Process Parameters in Electrical Discharge Machining.” International Journal of R&D In Engineering, Science And Management, Vol.3, Issue 7, April 2016, p.p.208-213, ISSN 2393-865X.
7 Anam Singh, Rohit Dhawan and Rajan Garg, “Ranking of Spray Cooling Technique using Fuzzy Scale and Permanent of Matrix.” International Journal of R&D In Engineering, Science And Management, Vol.4, Issue 1, May 2016, p.p.1-9, ISSN 2393-865X.
8 Pawan Nain, Rajan Garg and Mohit Bector, “Parametric Optimization of Wire Electrical Discharge Machining using High Carbon Chromium Steel (AISI D2)”, International Journal of R&D In Engineering, Science And Management, Vol.4, Issue 1, May 2016, p.p.37-45, ISSN 2393-865X.
9 Anam Singh, Rohit Dhawan, Rahul Mehra and Rajan Garg, “Attributes based comparison of high heat transfer cooling techniques using Graph theoretic Permanent of matrix approach.” International Journal of R&D In Engineering, Science And Management, Vol.4, Issue 1, May 2016, p.p.46-55, ISSN 2393-865X.
10 Rohit Dhawan,  Anam Singh, Rajan Garg, “Deep X-Ray Lithography for Fabrication of Micro Gas Bearings: A Review.” International Journal of R&D In Engineering, Science And Management, Vol.4, Issue 1, May 2016, p.p.68-71, ISSN 2393-865X.
List of publications 2015
S. No Publications
1 Mannar R. Maurya, Neeraj Saini, Fernando Avecilla, Liquid phase versus microwave assisted selective oxidation of volatile organic compounds involving dioxidomolybdenum(VI) and oxidoperoxidomolybdenum(VI) complexes as catalysts in the presence/absence of an N-based additive, Polyhedron, vol. 90, 2015, pp. 221–232. (IF: 2.284) (SJR: 0.426)
2 Mannar R. Maurya, Neeraj Saini, Fernando Avecilla, Catalytic oxidation of secondary alcohols by molybdenum complexes derived from 4-acyl pyrazolone in presence and absence of an N-based additive: Conventional versus microwave assisted method, Inorganica Chimica Acta, vol. 438, 2015, pp. 168–178. (IF: 2.433) (SJR: 0.455)
3 Mannar R. Maurya, Neeraj Saini, Fernando Avecilla, Effect of N-based additive on the optimization of liquid phase oxidation of bicyclic, cyclic and aromatic alcohols catalyzed by dioxidomolybdenum(VI) and oxidoperoxidomolybdenum(VI) complexes, RSC Advances, vol. 5, 2015, pp. 101076–101088. (IF: 3.049)
List of publications 2014
S. No Publications
1 Mannar R. Maurya, Neeraj Saini and Fernando Avecilla, “A comparative study of microwave and liquid phase degradation of volatile organic compounds involving new dioxide and oxido-peroxidomolybdenum(VI) complexes as catalyst”, confronted in the 5th Interdisciplinary Symposium on Material Chemistry (International Conference), organized by Chemistry Division, BARC and Society for Materials Chemistry, Location: Bhabha Atomic Research Centre, Trombay, Mumbai-400 085, Date: December 09-13, 2014; [K–107].
List of publications 2013
S. No Publications
    1 Mannar R. Maurya and Neeraj Saini, “Dioxomolybdenum(VI) and oxoperoxomolybdenum(VI) complexes having pyrone unit in dibasic tridentate ligands: Synthesis, spectral and structural aspects”, confronted in the 50th, Annual Convention of Chemists, organized by Indian Chemical Society, Location: Department of Chemistry and Centre for Advanced Studies in Chemistry, PanjabUniversity, Chandigarh-160 014, Date: December 04-07, 2013; [ING(PP)–32].
    2 Mannar R. Maurya, Neeraj Saini and Fernando Avecilla, “Catalytic oxidation of secondary alcohols by molybdenum complexes derived from 4-acyl pyrazolone in presence and absence of an N-based additive: Conventional versus microwave assisted method”, confronted in the Recent Advancements in Chemical Sciences, organized by Department of Chemistry, MNIT, Jaipur, Location: Malviya National Institute of Technology, Jaipur-302 017, Date: August 21-23, 2015; [PP–62].
3 Rathee A., Kumar, S., Bhardwaj, D., Haleem, A. (2013), Identification of Enablers of Poka-Yoke: A Brief Review, International Journal of Research in Information Technology vol.1 issue 8
4 Rajan Garg and Vineet Kumar, “Manufacturing System: Flexibility Perspective,” International Journal of Engineering Trends and Technology, Vol. 04, No. 06, pp:2305-2312, June, 2013. ISSN (online): 2231-5381.
List of publications 2012
S. No Publications
1 Rajan Garg, Sourabh Mittal and R. K. Singh, “Fuel Energizer: The Magnetizer a Concept of Liquid Engineering,” Proceeding of AICTE sponsored International Conference on Recent Trends in Computing, Mechatronics and Communication. pp. 129-133, 2012.
2 Megha Garg, Krishan Kumar and Rajan Garg, “A Modern Search Technique for Frequent Itemset using FP Tree,” International Journal of Latest Trend in Engineering & Technology. Vol. 01, No. 04, pp. 11-16, 2012. ISSN: 2278-621X.
3 Ajay Kr. Aggarwal and Rajan Garg, “Advanced Modelistic Approach of Flow Shop Scheduling Problem for 8-Jobs, 3-Machines by Heuristics Models Using Make Span Criterion,” International Journal of Mechanical Science & Civil Engineering, Vol. 01, No. 01, pp. 1-7, 2012. ISSN: 2320-2424.
4 Ajay Kr. Aggarwal and Rajan Garg, “Advanced Modelistic Approach of Flowshop Scheduling Problem for 10-Jobs, 8-Machines by Heuristics Models Using Makespan Criterion,” International Journal of Engineering, Business and Enterprise, Vol. 12, No. 327, pp. 76-84, 2012. ISSN (Print): 2279-0020, ISSN (Online): 2279-0039.
5 Ajay Kr. Aggarwal and Rajan Garg, “Flowshop Scheduling Problem for 10-Jobs, 10 Machines by Heuristics Models Using Makespan Criterion,” International Journal of Innovation in Engineering and Technology, Vol. 02, No. 01, pp. 28-37, 2013. ISSN (Print): 2319-1058.
6 Ajay Kr. Aggarwal and Rajan Garg, “Flowshop Scheduling Problem for 10-Jobs, 8 Machines by Make Span Criterion,” International Journal of Innovative Research & Development, Vol. 02, No. 04, pp. 389-402, 2013. ISSN (Online): 2278-0211.
7 Rajan Garg and Ajay Kr. Aggarwal, “Fuel Energizer: The Magnetizer, A Concept of Liquid Engineering,” International Journal of Innovative Research & Development, Vol. 02, No. 04, pp. 617-627, 2013. ISSN (Online): 2278-0211.
8 Ajay Kr. Aggarwal and Rajan Garg, “Advanced Modelistic Approach of Flowshop Scheduling Problem for 10 Jobs, 10 Machines by Heuristics Model Using Makespan Criterion,” International Journal of Engineering Trends and Technology, Vol. 04, No. 05, pp. 1742-1748, May, 2013. ISSN (online): 2231-5381.
List of publications 2011
S. No Publications
1 Rajan Garg and R. K. Singh, “Nano – Surface Engineering for Tribological Applications,” International Journal of Applied Engineering Research. Vol. 06, No.5, pp. 1030-1034, 2011.
2 Priyanka Kalra and Rajan Garg, “Analysis of Myoelectric Prosthetic Robotic Arm & Modelling for Elbow, Wrist & Finger Movements,” International Journal of Applied Engineering Research. Vol. 06, No.5, pp. 1035-1041, 2011.
3 Rajan Garg and R. K. Singh, “An Innovative View of Shape Memory Alloys as Smart Materials & its use in Robotics,” International Journal of Applied Engineering Research. Vol. 06, No.5, pp. 1069-1075, 2011.
4 Rajan Garg and R. K. Singh, “System Engineering Design through Quality Function Deployment,” Arya Bhatta Journal of Mathematics and Informatics. Vol. 03, No. 01, pp.151-160, 2011.
ADMISSIONS 2021